PHP 8.3.4 Released!

Çok baytlı Dizge İşlevleri

Kaynakça

Çok baytlı karakter kodlama şemaları ve bunlarla ilgili konular oldukça karmaşık olup bu belgelemenin kapsamı dışındadır. Bu konularla ilgili daha ayrıntılı bilgi edinmek için aşağıdaki adreslere ve başka kaynaklara bakınız.

İçindekiler

  • mb_check_encoding — Dizgelerin belirtilen kodlama için geçerli olup olmadığını sınar
  • mb_chr — Unicode karakter koduna göre karakteri döndürür
  • mb_convert_case — Bir dizgeye büyük-küçük harf dönüşümü uygular
  • mb_convert_encoding — Karakter kodlaması dönüşümü yapar
  • mb_convert_kana — Bir "kana" dizgeyi diğerine ("zen-kaku", "han-kaku" vs.) dönüştürür
  • mb_convert_variables — Değişken içeriğinin karakter kodlamasını dönüştürür
  • mb_decode_mimeheader — MIME başlık alanındaki dizgeyi dönüştürür
  • mb_decode_numericentity — HTML sayısal karakter gösterimini karaktere dönüştürür
  • mb_detect_encoding — Karakter kodlamasını algılar
  • mb_detect_order — Karakter kodlaması algılama sırasını tanımlar/döndürür
  • mb_encode_mimeheader — Dizgeyi MIME başlığı için kodlar
  • mb_encode_numericentity — Karakter kodlarını HTML sayısal karakter gösterimlerine dönüştürür
  • mb_encoding_aliases — Bilinen bir kodlama türünün takma adını döndürür
  • mb_ereg_match — Çok baytlı dizge için düzenli ifadeyi eşleştirir
  • mb_ereg_replace_callback — Bir düzenli ifade araması yapıp bir geriçağırım kullanarak çok baytlı yer değiştirme uygular
  • mb_ereg_replace — Çok baytlı karakter destekli düzenli ifade yer değiştirmesi yapar
  • mb_ereg_search_getpos — Sonraki düzenli ifade eşleşmesi için başlangıç konumunu döndürür
  • mb_ereg_search_getregs — Sonuncu çok baytlı düzenli ifade eşleşmesinin sonucunu döndürür
  • mb_ereg_search_init — Çok baytlı düzenli ifade eşleşmesi için kullanılacak dizge ve düzenli ifadeyi tanımlar
  • mb_ereg_search_pos — Evvelce tanımlanmış çok baytlı dizge için çok baytlı düzenli ifadenin eşleşen parçasının uzunluğunu ve konumunu döndürür
  • mb_ereg_search_regs — Çok baytlı düzenli ifadenin eşleşen parçası ile döner
  • mb_ereg_search_setpos — Sonraki düzenli ifade eşleşmesinin başlangıç noktasını tanımlar
  • mb_ereg_search — Evvelce tanımlanmış çok baytlı dizge için çok baytlı düzenli ifade eşleştirmesi yapar
  • mb_ereg — Düzenli ifadeyi çok baytlı karakter desteğiyle eşleştirir
  • mb_eregi_replace — Harf büyüklüğüne duyarsız çok baytlı karakter destekli düzenli ifade yer değiştirmesi yapar
  • mb_eregi — Harf büyüklüğüne duyarsız çok baytlı düzenli ifade eşleştirmesi uygular
  • mb_get_info — Mbstring bağımsız değişkenlerinin dahili ayarlarını döndürür
  • mb_http_input — HTTP girdi karakter kodlamasını algılar
  • mb_http_output — HTTP çıktı karakter kodlamasını tanımlar/döndürür
  • mb_internal_encoding — Dahili karakter kodlamasını tanımlar/döndürür
  • mb_language — Geçerli dili tanımlar/döndürür
  • mb_list_encodings — Desteklenen kodlamaların tamamını bir dizi olarak döndürür
  • mb_ord — Karakterin Unicode karakter kodunu döndürür
  • mb_output_handler — Çıktı tamporundaki karakter kodlamasını dönüştüren geriçağırım işlevi
  • mb_parse_str — GET/POST/COOKIE verisini çözümler ve küresel değişkenleri tanımlar
  • mb_preferred_mime_name — MIME karakter kümesi dizgesini döndürür
  • mb_regex_encoding — Çok baytlı düzenli ifade işlevleri için geçerli kodlamayı dizge olarak atar/döndürür
  • mb_regex_set_options — mbregex işlevleri için öntanımlı seçenekleri tanımlar/döndürür
  • mb_scrub — Bozuk bayt dizilerini yedek karakterle değiştirir
  • mb_send_mail — Kodlanmış olarak posta gönderir
  • mb_split — Çok baytlı bir dizgeyi düzenli ifade ile parçalara ayırır
  • mb_str_pad — Pad a multibyte string to a certain length with another multibyte string
  • mb_str_split — Belirtilen çok baytlı dizgenin karakterlerini içeren bir dizi döndürür
  • mb_strcut — Dizgenin başlangıcı ve uzunluğu belirtilen parçası ile döner
  • mb_strimwidth — Dizgeyi belirtilen genişlikte kırpar
  • mb_stripos — Harf büyüklüğüne duyarsız olarak, bir dizgenin içinde başka bir dizgeye ilk rastlanılan noktanın indisini döndürür
  • mb_stristr — Harf büyüklüğüne duyarsız olarak, bir dizgenin içinde başka bir dizgeye ilk rastlanılan noktaya göre dizgenin ilk veya son bölümü ile döner
  • mb_strlen — Dizge uzunluğu ile döner
  • mb_strpos — Bir dizgenin içinde başka bir dizgeye ilk rastlanılan noktanın indisini döndürür
  • mb_strrchr — Bir dizgenin içinde bulunan bir karaktere göre dizgenin ilk veya son bölümü ile döner
  • mb_strrichr — Harf büyüklüğüne duyarsız olarak bir dizgenin içinde bulunan bir karaktere göre dizgenin ilk veya son bölümü ile döner
  • mb_strripos — Bir dizgenin içinde harf büyüklüğüne duyarsız olarak başka bir dizgeye son rastlanılan noktanın indisini döndürür
  • mb_strrpos — Bir dizgenin içinde başka bir dizgeye son rastlanılan noktanın indisini döndürür
  • mb_strstr — Bir dizgenin içinde başka bir dizgeye ilk rastlanılan noktaya göre dizgenin ilk veya son bölümü ile döner
  • mb_strtolower — Dizgeyi küçük harfli yapar
  • mb_strtoupper — Dizgeyi büyük harfli yapar
  • mb_strwidth — Dizge genişliğini döndürür
  • mb_substitute_character — İkame karakteri atar/döndürür
  • mb_substr_count — Mevcut alt dizgelerin sayısı ile döner
  • mb_substr — Dizgenin bir alt dizgesini alır
add a note

User Contributed Notes 35 notes

up
69
deceze at gmail dot com
11 years ago
Please note that all the discussion about mb_str_replace in the comments is pretty pointless. str_replace works just fine with multibyte strings:

<?php

$string
= '漢字はユニコード';
$needle = 'は';
$replace = 'Foo';

echo
str_replace($needle, $replace, $string);
// outputs: 漢字Fooユニコード

?>

The usual problem is that the string is evaluated as binary string, meaning PHP is not aware of encodings at all. Problems arise if you are getting a value "from outside" somewhere (database, POST request) and the encoding of the needle and the haystack is not the same. That typically means the source code is not saved in the same encoding as you are receiving "from outside". Therefore the binary representations don't match and nothing happens.
up
20
Eugene Murai
19 years ago
PHP can input and output Unicode, but a little different from what Microsoft means: when Microsoft says "Unicode", it unexplicitly means little-endian UTF-16 with BOM(FF FE = chr(255).chr(254)), whereas PHP's "UTF-16" means big-endian with BOM. For this reason, PHP does not seem to be able to output Unicode CSV file for Microsoft Excel. Solving this problem is quite simple: just put BOM infront of UTF-16LE string.

Example:

$unicode_str_for_Excel = chr(255).chr(254).mb_convert_encoding( $utf8_str, 'UTF-16LE', 'UTF-8');
up
7
Hayley Watson
5 years ago
SOME multibyte encodings can safely be used in str_replace() and the like, others cannot. It's not enough to ensure that all the strings involved use the same encoding: obviously they have to, but it's not enough. It has to be the right sort of encoding.

UTF-8 is one of the safe ones, because it was designed to be unambiguous about where each encoded character begins and ends in the string of bytes that makes up the encoded text. Some encodings are not safe: the last bytes of one character in a text followed by the first bytes of the next character may together make a valid character. str_replace() knows nothing about "characters", "character encodings" or "encoded text". It only knows about the string of bytes. To str_replace(), two adjacent characters with two-byte encodings just looks like a sequence of four bytes and it's not going to know it shouldn't try to match the middle two bytes.

While real-world examples can be found of str_replace() mangling text, it can be illustrated by using the HTML-ENTITIES encoding. It's not one of the safe ones. All of the strings being passed to str_replace() are valid HTML-ENTITIES-encoded text so the "all inputs use the same encoding" rule is satisfied.

The text is "x<y". It is represented by the byte string [78 26 6c 74 3b 79]. Note that the text has three characters, but the string has six bytes.

<?php

$string
= 'x&lt;y';
mb_internal_encoding('HTML-ENTITIES');

echo
"Text length: ", mb_strlen($string), "\tString length: ", strlen($string), " ... ", $string, "\n";
// Three characters, six bytes; the text reads "x<y".

$newstring = str_replace('l', 'g', $string);
echo
"Text length: ", mb_strlen($newstring), "\tString length: ", strlen($newstring), " ... ", $newstring, "\n";
// Three characters, six bytes, but now the text reads "x>y"; the wrong characters have changed.

$newstring = str_replace(';', ':', $string);
echo
"Text length: ", mb_strlen($newstring), "\tString length: ", strlen($newstring), " ... ", $newstring, "\n";
// Now even the length of the text is wrong and the text is trashed.

?>

Even though neither 'l' nor ';' appear in the text "x<y", str_replace() still found and changed bytes. In one case, it changed the text to "x>y" and in the other it broke the encoding completely.

One more reason to use UTF-8 if you can, I guess.
up
12
mdoocy at u dot washington dot edu
17 years ago
Note that some of the multi-byte functions run in O(n) time, rather than constant time as is the case for their single-byte equivalents. This includes any functionality requiring access at a specific index, since random access is not possible in a string whose number of bytes will not necessarily match the number of characters. Affected functions include: mb_substr(), mb_strstr(), mb_strcut(), mb_strpos(), etc.
up
8
mitgath at gmail dot com
14 years ago
according to:
http://bugs.php.net/bug.php?id=21317
here's missing function

<?php
function mb_str_pad ($input, $pad_length, $pad_string, $pad_style, $encoding="UTF-8") {
return
str_pad($input,
strlen($input)-mb_strlen($input,$encoding)+$pad_length, $pad_string, $pad_style);
}
?>
up
5
treilor at gmail dot com
9 years ago
A small note for those who will follow rawsrc at gmail dot com's advice: mb_split uses regular expressions, in which case it may make sense to use built-in function mb_ereg_replace.
up
11
Anonymous
10 years ago
Yet another single-line mb_trim() function

<?php
function mb_trim($string, $trim_chars = '\s'){
return
preg_replace('/^['.$trim_chars.']*(?U)(.*)['.$trim_chars.']*$/u', '\\1',$string);
}
$string = ' "some text." ';
echo
mb_trim($string, '\s".');
//some text
?>
up
2
peter kehl
18 years ago
UTF-16LE solution for CSV for Excel by Eugene Murai works well:
$unicode_str_for_Excel = chr(255).chr(254).mb_convert_encoding( $utf8_str, 'UTF-16LE', 'UTF-8');

However, then Excel on Mac OS X doesn't identify columns properly and its puts each whole row in its own cell. In order to fix that, use TAB "\\t" character as CSV delimiter rather than comma or colon.

You may also want to use HTTP encoding header, such as
header( "Content-type: application/vnd.ms-excel; charset=UTF-16LE" );
up
8
roydukkey at roydukkey dot com
14 years ago
This would be one way to create a multibyte substr_replace function

<?php
function mb_substr_replace($output, $replace, $posOpen, $posClose) {
return
mb_substr($output, 0, $posOpen).$replace.mb_substr($output, $posClose+1);
}
?>
up
7
php at kamiware dot org
7 years ago
str_replace is NOT multi-bite safe.

This Ukrainian word gives a bug when used in the next code: відео

$rubishcharacters='[#|\[{}\]´`≠,;.:-\\_<>=*+"\'?()!§$&%';
$searchstring='відео';

$result = str_replace(str_split($rubishcharacters), ' ', $searchstring);
up
6
Ben XO
15 years ago
PHP5 has no mb_trim(), so here's one I made. It work just as trim(), but with the added bonus of PCRE character classes (including, of course, all the useful Unicode ones such as \pZ).

Unlike other approaches that I've seen to this problem, I wanted to emulate the full functionality of trim() - in particular, the ability to customise the character list.

<?php
/**
* Trim characters from either (or both) ends of a string in a way that is
* multibyte-friendly.
*
* Mostly, this behaves exactly like trim() would: for example supplying 'abc' as
* the charlist will trim all 'a', 'b' and 'c' chars from the string, with, of
* course, the added bonus that you can put unicode characters in the charlist.
*
* We are using a PCRE character-class to do the trimming in a unicode-aware
* way, so we must escape ^, \, - and ] which have special meanings here.
* As you would expect, a single \ in the charlist is interpretted as
* "trim backslashes" (and duly escaped into a double-\ ). Under most circumstances
* you can ignore this detail.
*
* As a bonus, however, we also allow PCRE special character-classes (such as '\s')
* because they can be extremely useful when dealing with UCS. '\pZ', for example,
* matches every 'separator' character defined in Unicode, including non-breaking
* and zero-width spaces.
*
* It doesn't make sense to have two or more of the same character in a character
* class, therefore we interpret a double \ in the character list to mean a
* single \ in the regex, allowing you to safely mix normal characters with PCRE
* special classes.
*
* *Be careful* when using this bonus feature, as PHP also interprets backslashes
* as escape characters before they are even seen by the regex. Therefore, to
* specify '\\s' in the regex (which will be converted to the special character
* class '\s' for trimming), you will usually have to put *4* backslashes in the
* PHP code - as you can see from the default value of $charlist.
*
* @param string
* @param charlist list of characters to remove from the ends of this string.
* @param boolean trim the left?
* @param boolean trim the right?
* @return String
*/
function mb_trim($string, $charlist='\\\\s', $ltrim=true, $rtrim=true)
{
$both_ends = $ltrim && $rtrim;

$char_class_inner = preg_replace(
array(
'/[\^\-\]\\\]/S', '/\\\{4}/S' ),
array(
'\\\\\\0', '\\' ),
$charlist
);

$work_horse = '[' . $char_class_inner . ']+';
$ltrim && $left_pattern = '^' . $work_horse;
$rtrim && $right_pattern = $work_horse . '$';

if(
$both_ends)
{
$pattern_middle = $left_pattern . '|' . $right_pattern;
}
elseif(
$ltrim)
{
$pattern_middle = $left_pattern;
}
else
{
$pattern_middle = $right_pattern;
}

return
preg_replace("/$pattern_middle/usSD", '', $string) );
}
?>
up
3
Daniel Rhodes
10 years ago
Here's a cheap and cheeky function to remove leading and trailing *punctuation* (or more specifically "non-word characters") from a UTF-8 string in whatever language. (At least it works well enough for Japanese and English.)

/**
* Trim singlebyte and multibyte punctuation from the start and end of a string
*
* @author Daniel Rhodes
* @note we want the first non-word grabbing to be greedy but then
* @note we want the dot-star grabbing (before the last non-word grabbing)
* @note to be ungreedy
*
* @param string $string input string in UTF-8
* @return string as $string but with leading and trailing punctuation removed
*/
function mb_punctuation_trim($string)
{
preg_match('/^[^\w]{0,}(.*?)[^\w]{0,}$/iu', $string, $matches); //case-'i'nsensitive and 'u'ngreedy

if(count($matches) < 2)
{
//some strange error so just return the original input
return $string;
}

return $matches[1];
}

Hope you like it!
up
2
mattr at telebody dot com
9 years ago
A brief note on Daniel Rhodes' mb_punctuation_trim().
The regular expression modifier u does not mean ungreedy, rather it means the pattern is in UTF-8 encoding. Instead the U modifier should be used to get ungreedy behavior. (I have not otherwise tested his code.)
See http://php.net/manual/en/reference.pcre.pattern.modifiers.php
up
1
abidul dot rmdn at gmail dot com
4 years ago
Having to migrate to MB functions can be a bit of pain if you have a big project. it took us a while at my company but then we made a small script and explained it in a small blog.
https://link.medium.com/25w1LronCX

which makes it really easy to migrate to mb_ functions.
up
1
rr_news at live dot de
7 years ago
The suggestion from "mt at mediamedics dot nl" is not that bad like the down votes indicate. There is only one small bug which can be easily fixed to make it work.
The head of the "for" need to be modified by replacing $i + $split_length by $i += $split_length.

Here is the full working code, with additional check to verify that the method doesn't exists already:

<?php
if ( !function_exists('mb_str_split') )
{
function
mb_str_split($string, $split_length = 1)
{
mb_internal_encoding('UTF-8');
mb_regex_encoding('UTF-8');

$split_length = ($split_length <= 0) ? 1 : $split_length;

$mb_strlen = mb_strlen($string, 'utf-8');

$array = array();

for(
$i = 0; $i < $mb_strlen; $i += $split_length)
{
$array[] = mb_substr($string, $i, $split_length);
}

return
$array;
}
}
?>
up
2
Daniel Rhodes
10 years ago
Here's a cheap and cheeky function to remove leading and trailing *punctuation* (or more specifically "non-word characters") from a UTF-8 string in whatever language. (At least it works well enough for Japanese and English.)

/**
* Trim singlebyte and multibyte punctuation from the start and end of a string
*
* @author Daniel Rhodes
* @note we want the first non-word grabbing to be greedy but then
* @note we want the dot-star grabbing (before the last non-word grabbing)
* @note to be ungreedy
*
* @param string $string input string in UTF-8
* @return string as $string but with leading and trailing punctuation removed
*/
function mb_punctuation_trim($string)
{
preg_match('/^[^\w]{0,}(.*?)[^\w]{0,}$/iu', $string, $matches); //case-'i'nsensitive and 'u'ngreedy

if(count($matches) < 2)
{
//some strange error so just return the original input
return $string;
}

return $matches[1];
}

Hope you like it!
up
6
rawsrc at gmail dot com
12 years ago
Hi,

For those who are looking for mb_str_replace, here's a simple function :
<?php
function mb_str_replace($needle, $replacement, $haystack) {
return
implode($replacement, mb_split($needle, $haystack));
}
?>
I haven't found a simpliest way to proceed :-)
up
2
v dot r dot sanaty at gmail dot com
6 years ago
The multibyte version of substr_replace function:
(Inspired by roydukkey's note with some corrections)

function mb_substr_replace($string, $replacement, $start, $length){
return mb_substr($string, 0, $start).$replacement.mb_substr($string, $start+$length);
}
up
1
sakai at d4k dot net
14 years ago
I hope this mb_str_replace will work for arrays. Please use mb_internal_encoding() beforehand, if you need to change the encoding.

Thanks to marc at ermshaus dot org for the original.

<?php

if(!function_exists('mb_str_replace')) {

function
mb_str_replace($search, $replace, $subject) {

if(
is_array($subject)) {
$ret = array();
foreach(
$subject as $key => $val) {
$ret[$key] = mb_str_replace($search, $replace, $val);
}
return
$ret;
}

foreach((array)
$search as $key => $s) {
if(
$s == '') {
continue;
}
$r = !is_array($replace) ? $replace : (array_key_exists($key, $replace) ? $replace[$key] : '');
$pos = mb_strpos($subject, $s);
while(
$pos !== false) {
$subject = mb_substr($subject, 0, $pos) . $r . mb_substr($subject, $pos + mb_strlen($s));
$pos = mb_strpos($subject, $s, $pos + mb_strlen($r));
}
}

return
$subject;

}

}

?>
up
1
nzkiwi at NOSPAMmte dot biglobe dot ne dot jp
18 years ago
A friend has pointed out that the entry
"mbstring.http_input PHP_INI_ALL" in Table 1 on the mbstring page appears to be wrong: above Example 4 it says that "There is no way to control HTTP input character conversion from PHP script. To disable HTTP input character conversion, it has to be done in php.ini".
Also the table shows the old-PHP-version defaults:
;; Disable HTTP Input conversion
mbstring.http_input = pass *BUT* (for PHP 4.3.0 or higher)
;; Disable HTTP Input conversion
mbstring.encoding_translation = Off
up
1
daniel at softel dot jp
17 years ago
Note that although "multi-byte" hints at total internationalization, the mb_ API was designed by a Japanese person to support the Japanese language.

Some of the functions, for example mb_convert_kana(), make absolutely no sense outside of a Japanese language environment.

It should perhaps be considered "lucky" if the functions work with non-Japanese multi-byte languages.

I don't mean any disrespect to the mb_ API because I'm using it everyday and I appreciate its usefulness, but maybe a better name would be the jp_ API.
up
0
Daniel Rhodes
10 years ago
Here's a cheap and cheeky function to remove leading and trailing *punctuation* (or more specifically "non-word characters") from a UTF-8 string in whatever language. (At least it works well enough for Japanese and English.)

/**
* Trim singlebyte and multibyte punctuation from the start and end of a string
*
* @author Daniel Rhodes
* @note we want the first non-word grabbing to be greedy but then
* @note we want the dot-star grabbing (before the last non-word grabbing)
* @note to be ungreedy
*
* @param string $string input string in UTF-8
* @return string as $string but with leading and trailing punctuation removed
*/
function mb_punctuation_trim($string)
{
preg_match('/^[^\w]{0,}(.*?)[^\w]{0,}$/iu', $string, $matches); //case-'i'nsensitive and 'u'ngreedy

if(count($matches) < 2)
{
//some strange error so just return the original input
return $string;
}

return $matches[1];
}

Hope you like it!
up
0
efesar
13 years ago
This small mb_trim function works for me.

<?php
function mb_trim( $string )
{
$string = preg_replace( "/(^\s+)|(\s+$)/us", "", $string );

return
$string;
}
?>
up
0
johannesponader at dontspamme dot googlemail dot co
13 years ago
Please note that when migrating code to handle UTF-8 encoding, not only the functions mentioned here are useful, but also the function htmlentities() has to be changed to htmlentities($var, ENT_COMPAT, "UTF-8") or similar. I didn't scan the manual for it, but there could be some more functions that need adjustments like this.
up
0
marc at ermshaus dot org
15 years ago
A small correction to patrick at hexane dot org's mb_str_replace function. The original function does not work as intended in case $replacement contains $needle.

<?php
function mb_str_replace($needle, $replacement, $haystack)
{
$needle_len = mb_strlen($needle);
$replacement_len = mb_strlen($replacement);
$pos = mb_strpos($haystack, $needle);
while (
$pos !== false)
{
$haystack = mb_substr($haystack, 0, $pos) . $replacement
. mb_substr($haystack, $pos + $needle_len);
$pos = mb_strpos($haystack, $needle, $pos + $replacement_len);
}
return
$haystack;
}
?>
up
0
patrick at hexane dot org
15 years ago
I wonder why there isn't a mb_str_replace(). Here's one for now:

function mb_str_replace( $needle, $replacement, $haystack ) {
$needle_len = mb_strlen($needle);
$pos = mb_strpos( $haystack, $needle);
while (!($pos ===false)) {
$front = mb_substr( $haystack, 0, $pos );
$back = mb_substr( $haystack, $pos + $needle_len);
$haystack = $front.$replacement.$back;
$pos = mb_strpos( $haystack, $needle);
}
return $haystack;
}
up
0
chris at maedata dot com
16 years ago
The opposite of what Eugene Murai wrote in a previous comment is true when importing/uploading a file. For instance, if you export an Excel spreadsheet using the Save As Unicode Text option, you can use the following to convert it to UTF-8 after uploading:

//Convert file to UTF-8 in case Windows mucked it up
$file = explode( "\n", mb_convert_encoding( trim( file_get_contents( $_FILES['file']['tmp_name'] ) ), 'UTF-8', 'UTF-16' ) );
up
0
pdezwart .at. snocap
17 years ago
If you are trying to emulate the UnicodeEncoding.Unicode.GetBytes() function in .NET, the encoding you want to use is: UCS-2LE
up
0
Anonymous
18 years ago
get the string octet-size, when mbstring.func_overload is set to 2 :

<?php
function str_sizeof($string) {
return
count(preg_split("`.`", $string)) - 1 ;
}
?>

answering to peter albertsson, once you got your data octet-size, you can access each octet with something
$string[0] ... $string[$size-1], since the [ operator doesn't complies with multibytes strings.
up
-1
hayk at mail dot ru
17 years ago
Since PHP 5.1.0 and PHP 4.4.2 there is an Armenian ArmSCII-8 (ArmSCII-8, ArmSCII8, ARMSCII-8, ARMSCII8) encoding avaliable.
up
-2
mt at mediamedics dot nl
14 years ago
A multibyte one-to-one alternative for the str_split function (http://php.net/manual/en/function.str-split.php):

<?php
function mb_str_split($string, $split_length = 1){

mb_internal_encoding('UTF-8');
mb_regex_encoding('UTF-8');

$split_length = ($split_length <= 0) ? 1 : $split_length;

$mb_strlen = mb_strlen($string, 'utf-8');

$array = array();

for(
$i = 0; $i < $mb_strlen; $i + $split_length){

$array[] = mb_substr($string, $i, $split_length);
}

return
$array;

}
?>
up
-2
peter dot albertsson at spray dot se
18 years ago
Setting mbstring.func_overload = 2 may break your applications that deal with binary data.

After having set mbstring.func_overload = 2 and mbstring.internal_encoding = UTF-8 I can't even read a binary file and print/echo it to output without corrupting it.
up
-1
peter AT(no spam) dezzignz dot com
14 years ago
The function trim() has not failed me so far in my multibyte applications, but in case one needs a truly multibyte function, here it is. The nice thing is that the character to remove can be whitespace or any other specified character, even a multibyte character.

<?php

// multibyte string split

function mbStringToArray ($str) {
if (empty(
$str)) return false;
$len = mb_strlen($str);
$array = array();
for (
$i = 0; $i < $len; $i++) {
$array[] = mb_substr($str, $i, 1);
}
return
$array;
}

// removes $rem at both ends

function mb_trim ($str, $rem = ' ') {
if (empty(
$str)) return false;
// convert to array
$arr = mbStringToArray($str);
$len = count($arr);
// left side
for ($i = 0; $i < $len; $i++) {
if (
$arr[$i] === $rem) $arr[$i] = '';
else break;
}
// right side
for ($i = $len-1; $i >= 0; $i--) {
if (
$arr[$i] === $rem) $arr[$i] = '';
else break;
}
// convert to string
return implode ('', $arr);
}

?>
up
-1
Aardvark
18 years ago
Since not all hosted servces currently support the multi-byte function set, it may still be necessary to process Unicode strings using standard single byte functions. The function at the following link - http://www.kanolife.com/escape/2006/03/php-unicode-processing.html - shows by example how to do this. While this only covers UTF-8, the standard PHP function "iconv" allows conversion into and out of UTF-8 if strings need to be input or output in other encodings.
up
-3
motin at demomusic dot nu
17 years ago
As peter dot albertsson at spray dot se already pointed out, overloading strlen may break code that handles binary data and relies upon strlen for bytelengths.

The problem occurs when a file is filled with a string using fwrite in the following manner:

$len = strlen($data);
fwrite($fp, $data, $len);

fwrite takes amount of bytes as the third parameter, but mb_strlen returns the amount of characters in the string. Since multibyte characters are possibly more than one byte in length each - this will result in that the last characters of $data never gets written to the file.

After hours of investigating why PEAR::Cache_Lite didn't work - the above is what I found.

I made an attempt at using single byte functions, but it doesn't work. Posting here anyway in case it helps someone else:

/**
* PHP Singe byte functions simulation (non successful)
*
* Usage: sb_string(functionname, arg1, arg2, etc);
* Example: sb_string("strlen", "tuöéä"); returns 8 (should...)
*/
function sb_string() {

$arguments = func_get_args();

$func_overloading = ini_get("mbstring.func_overload");

ini_set("mbstring.func_overload", 0);

$ret = call_user_func_array(array_shift($arguments), $arguments);

ini_set("mbstring.func_overload", $func_overloading);

return $ret;

}
To Top