PHP 8.3.4 Released!

Imagick::distortImage

(PECL imagick 2 >= 2.0.1, PECL imagick 3)

Imagick::distortImageDeforma una imagen utilizando varios métodos de distorsión

Descripción

public Imagick::distortImage(int $method, array $arguments, bool $bestfit): bool

Deforma una imagen utilizando varios métodos de distorsión, mapeando la paleta de colores de la imagen de origen a una nueva imagen destino normalmente del mismo tamaño que la imagen de origen, a menos que 'bestfit' esté establecido a true.

Si 'bestfit' está habilitado, y la distorsión lo permite, la imagen destino se ajusta para asegurarse de que la 'imagen' de origen entera se ajustará dentro de la imagen destino final, la cuál será redimensionada e compensada acordemente. También, en la mayoría de los casos el índice virtual de la imagen de origen será tomado en cuenta en el mapeado.

Este método está disponible si Imagick ha sido compilado con la versión 6.3.6 o superior de ImageMagick.

Parámetros

method

El método de distorsión de la imagen. Véase constantes de distorsión

arguments

Los argumentos para este método de distorsión

bestfit

Intenta redimensionar la imagen destino para ajustarse a la imagen de origen deformada

Valores devueltos

Devuelve true en caso de éxito.

Errores/Excepciones

Lanza ImagickException en caso de error.

Ejemplos

Ejemplo #1 Usar Imagick::distortImage():

Deformar una imagen y mostrarla en el navegador.

<?php
/* Crear un nuevo objeto */
$im = new Imagick();

/* Crear un nuevo patrón de tablero de ajedrez */
$im->newPseudoImage(100, 100, "pattern:checkerboard");

/* Esteblecer el formato de la imagen a png */
$im->setImageFormat('png');

/* Rellenar las nuevas áreas visibles con transparente */
$im->setImageVirtualPixelMethod(Imagick::VIRTUALPIXELMETHOD_TRANSPARENT);

/* Activar el mate */
$im->setImageMatte(true);

/* Puntos de control para la distorsión */
$puntosControl = array( 10, 10,
10, 5,

10, $im->getImageHeight() - 20,
10, $im->getImageHeight() - 5,

$im->getImageWidth() - 10, 10,
$im->getImageWidth() - 10, 20,

$im->getImageWidth() - 10, $im->getImageHeight() - 10,
$im->getImageWidth() - 10, $im->getImageHeight() - 30);

/* Realizar la distorsión */
$im->distortImage(Imagick::DISTORTION_PERSPECTIVE, $puntosControl, true);

/* Imprimir la imagen */
header("Content-Type: image/png");
echo
$im;
?>

El resultado del ejemplo sería algo similar a:

Salida del ejemplo : Using Imagick::distortImage()

Ver también

add a note

User Contributed Notes 4 notes

up
4
peter dot e dot lind at gmail dot com
9 years ago
It is worth nothing that details on distorts as well as arguments can be found at http://www.imagemagick.org/Usage/distorts/ - the PHP manual doesn't give much, if any, detail on arguments.

I found this very useful when I had to do a translated rotation on an image - i.e. rotating around a point in the image that was not square in the center. This can be achieved by using distortImage with Imagick::DISTORTION_SCALEROTATETRANSLATE like this:

<?php

$imagick
= new Imagick('/path/to/image');
$args = array(
20, # x point to rotate around
20, # y point to rotate around
1, # scaling factor - 1 means no scaling
90, # angle to rotate
);

$imagick->setImageVirtualPixelMethod(Imagick::VIRTUALPIXELMETHOD_TRANSPARENT);
$imagick->distortImage(Imagick::DISTORTION_SCALEROTATETRANSLATE, $args, true);

?>

Note that this type of distort takes from 1 to 7 arguments, depending on what you want to do exactly - there is a lot of flexibility here.
up
9
DJ Mike
12 years ago
Affine

<?php
$image
= new imagick( "opossum.jpg" );
$points = array(
0,0, 25,25,
100,0, 100,50
);
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_AFFINE, $points, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Affine Projection

<?php
$image
= new imagick( "opossum.jpg" );
$points = array( 0.9,0.3,
-
0.2,0.7,
20,15 );
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_AFFINEPROJECTION, $points, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Arc

<?php
$image
= new imagick( "opossum.jpg" );
$draw = new imagickdraw();
$degrees = array( 180 );
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_ARC, $degrees, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Rotated Arc

<?php
$image
= new imagick( "opossum.jpg" );
$draw = new imagickdraw();
$degrees = array( 180, 45, 100, 20 );
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_ARC, $degrees, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Bilinear

<?php
$image
= new imagick( "opossum.jpg" );
$points = array(
0,0, 25,25, # top left
176,0, 126,0, # top right
0,135, 0,105, # bottom right
176,135, 176,135 # bottum left
);
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_BILINEAR, $points, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Perspective

<?php
$image
= new imagick( "opossum.jpg" );
$points = array(
0,0, 25,25, # top left
176,0, 126,0, # top right
0,135, 0,105, # bottom right
176,135, 176,135 # bottum left
);
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( Imagick::DISTORTION_PERSPECTIVE, $points, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>

Scale Rotate Translate

<?php
$image
= new imagick( "opossum.jpg" );
$points = array(
1.5, # scale 150%
150 # rotate
);
$image->setimagebackgroundcolor("#fad888");
$image->setImageVirtualPixelMethod( imagick::VIRTUALPIXELMETHOD_BACKGROUND );
$image->distortImage( imagick::DISTORTION_SCALEROTATETRANSLATE, $points, TRUE );
header( "Content-Type: image/jpeg" );
echo
$image;
?>
up
1
Abe
3 years ago
Control Points for DISTORTION_PERSPECTIVE are pairs of x0, y0, x1, y1 coordinates, where x0/y0 is the original point and x1/y1 is the destination point,

e.g. for a four point distortion:

<?php

$im
= new imagick( $fn);

$w=$im->getImageWidth();
$h=$im->getImageHeight();
$im->setImageFormat('png');

$controlPoints = array(
$tLx, $tLy, 0, 0, // top left
$tRx, $tRy, $w, 0, // top right
$bRx, $bRy, $w, $h, // bottom right
$bLx, $bLy, 0, $h // bottom left
);

/* Perform the distortion */
$im->distortImage(Imagick::DISTORTION_PERSPECTIVE, $controlPoints, false);

// Output the image
$output = $im->getimageblob();
$outputtype = $im->getFormat();

header("Content-type: $outputtype");
echo
$output;

?>
up
1
ashokmca.g at gmail dot com
13 years ago
Slide image with shadow using distortImage

<?php

$slideValue
= 150;

// Create new object
$im = new Imagick("grnhrs.jpg");

// Resize
$im->thumbnailImage(500,400);

// Set the image format to png
$im->setImageFormat('png');

//Clone the current object
$shadow = $im->clone();

//Set image background color to black (this is the color of the shadow)
$shadow->setImageBackgroundColor( new ImagickPixel( 'black' ) );

//Create the shadow
$shadow->shadowImage( 80, 10, 5, 5 );

// Fill background area with transparent for image
//VIRTUALPIXELMETHOD_TRANSPARENT
$im->setImageVirtualPixelMethod(Imagick::VIRTUALPIXELMETHOD_ TRANSPARENT);

// Activate matte
$im->setImageMatte(true);

//Control points for the distortion
$controlPoints = array( 0, 0,
$slideValue, 0,

0, $im->getImageHeight(),
0, $im->getImageHeight(),

$im->getImageWidth(), 0,
$im->getImageWidth(), 0,

$im->getImageWidth(), $im->getImageHeight(),
$im->getImageWidth()-$slideValue, $im->getImageHeight());

// Perform the distortion
$im->distortImage(Imagick::DISTORTION_PERSPECTIVEPROJECTION, $controlPoints, true);

// Perform the distortion in shadow image
$shadow->distortImage(Imagick::DISTORTION_PERSPECTIVEPROJECTION, $controlPoints, true);

// Imagick::shadowImage only creates the shadow.
// That is why the original image is composited over it
$shadow->compositeImage( $im, Imagick::COMPOSITE_OVER, 0, 0 );

/* Ouput the image */
header("Content-Type: image/png");
echo
$shadow;

?>
To Top