CakeFest 2024: The Official CakePHP Conference

win32_set_service_status

(PECL win32service >=0.1.0)

win32_set_service_statusMet à jour le statut d'un service

Description

win32_set_service_status(int $status, int $checkpoint = 0): void

Informe le SCM d'un statut courant d'un service qui fonctionne. Cet appel est seulement valide pour un processus de service qui fonctionne.

Attention

Depuis la version 0.2.0, cette fonction fonctionne uniquement en ligne de commande. Elle est désactivé dans les autres cas.

Liste de paramètres

status

Le code de statut de service, un de WIN32_SERVICE_RUNNING, WIN32_SERVICE_STOPPED, WIN32_SERVICE_STOP_PENDING, WIN32_SERVICE_START_PENDING, WIN32_SERVICE_CONTINUE_PENDING, WIN32_SERVICE_PAUSE_PENDING, WIN32_SERVICE_PAUSED.

checkpoint

Cette valeur sera incrémentée par le service périodiquement pour reporter sa progression lors des opérations de démarrage, d'arrêt, de pause ou de reprise. Par exemple, le service incrémentera cette valeur lorsqu'il aura terminé chaque étape de son initialisation lors de son démarrage.

checkpoint n'est valide que lorsque status est une des constantes suivantes : WIN32_SERVICE_STOP_PENDING, WIN32_SERVICE_START_PENDING, WIN32_SERVICE_CONTINUE_PENDING ou WIN32_SERVICE_PAUSE_PENDING.

Valeurs de retour

Aucune valeur n'est retournée.

Avant la version 1.0.0, retournait WIN32_NO_ERROR on success, false if there is a problem with the parameters or a Win32 Error Code on failure.

Erreurs / Exceptions

Avant la version 1.0.0, si cette fonction est utilisé en dehors du SAPI "cli", une erreur E_ERROR sera émise.

À partir de la version 1.0.0, lancera une Win32ServiceException si le SAPI n'est pas "cli"

Historique

Version Description
PECL win32service 1.0.0 Lance une ValueError si un paramètre est invalide, avant false était retourné.
PECL win32service 1.0.0 Lance une Win32ServiceException en cas d'erreur, avant un Code d'erreur Win32 était retourné.
PECL win32service 1.0.0 Le type de retour est maintenant void, avant il était mixed.
PECL win32service 0.2.0 Cette fonction fonctionne uniquement en ligne de commande.

Voir aussi

add a note

User Contributed Notes 2 notes

up
3
m dot hald at surfto dot ch
15 years ago
On my Machine (Win XP SP2) the function "win32_get_last_control_message" never returns 4 so i will have to reply to 0 also.

finally after mixing several examples i now have a version working woithout filling my event log with errors:

<?php

/*
* PHP SAMPLE TEMPLATE
*/

/*
* APP MAIN FUNCTION
* Called each second after the function last time finished
* Should not take longer than max 20 seconds to execute
* ELSE you should call NTServiceResponder(); at least each 20 secs
* WARNING: NTServiceResponder will exit; if there was a STOP request
*/
function Service_Main()
{
// YOU APPLICATION CODE HERE !!!
sleep(1); // dummy something
}

/********************************************************************
*
* SERVICE CONTROLLING
*
********************************************************************/

$SERVICE_NAME = "phptestservice";
$SERVICE_DISPLAY = "Test Service with PHP";

// so u can get: $SERVICE_PATH_PARTS["dirname"] $SERVICE_PATH_PARTS["basename"] $SERVICE_PATH_PARTS["extension"]
$SERVICE_PATH_PARTS = pathinfo(__FILE__);

$SERVICE_PARAMS = " run";

if (!isset(
$argv[1]))
{
die(
"this application need to be installed as a service.\n run with param install");
}

if (
$argv[1] == 'install')
{
$x = win32_create_service(array(
'service' => $SERVICE_NAME,
'display' => $SERVICE_DISPLAY,
'params' => __FILE__ . $SERVICE_PARAMS,
//'path' => $SERVICE_PATH_PARTS["dirname"] . '\php.exe'
));
debug_zval_dump($x);
exit;
}
else if (
$argv[1] == 'uninstall')
{
$x = win32_delete_service('dummyphp');
debug_zval_dump($x);
exit;
}
else if (
$argv[1] != 'run')
{
die(
"bogus args, needs to run as service");
}

// Connect to service dispatcher and notify that startup was successful
if (!win32_start_service_ctrl_dispatcher($SERVICE_NAME)) die('Could not connect to service :'.$SERVICE_NAME);
win32_set_service_status(WIN32_SERVICE_RUNNING);

// Main Server Loop
while (1)
{
NTServiceResponder();

// Main script goes here
Service_Main();

sleep(1); // at least 1 sec delay per loop
}
win32_set_service_status(WIN32_SERVICE_STOPPED);

/*
* Response to NTServiceRequests
*/
function NTServiceResponder()
{

switch (
win32_get_last_control_message())
{
case
0: // PATCH for: seems never to go to 4 (WIN32_SERVICE_CONTROL_INTERROGATE)
win32_set_service_status(WIN32_SERVICE_RUNNING);
return
TRUE;
break;
case
WIN32_SERVICE_CONTROL_CONTINUE:
return
TRUE; // "Continue"
case WIN32_SERVICE_CONTROL_INTERROGATE:
win32_set_service_status(WIN32_SERVICE_RUNNING);
return
TRUE; // Respond with status
case WIN32_SERVICE_CONTROL_STOP:
win32_set_service_status(WIN32_SERVICE_STOPPED);
exit;
// Terminate script
default:
win32_set_service_status(WIN32_ERROR_CALL_NOT_IMPLEMENTED); // Add more cases to handle other service calls
}

return
FALSE;
}

?>
up
-1
paul_nelson57071 at yahoo dot com
13 years ago
So after much searching I finally found all the peices to make a working windows service & server including:
- Installing & Uninstalling the service
- Starting & Stopping the Service
- Actually running a basic Server
- Responding to windows Service to Stop/Start/Restart

I hope you find this useful! I did this using PHP 5.2 and the PECL library for 5.2 (PHP 5.3 at the time does not have a PECL Library compiled for it)

<?php
//Service Settings
$Service = 'MyServiceFinal';
$Display = 'My PHP Service';

//Server Settings
$host = '127.0.0.1'; //Bind to IP #
$port = 23; //On port #
$max = 20; //Maximum Clients


//Exit if no start-up argument is passed
if (!isset($argv[1])){ShowHelp(); exit;}

//Create Windows Service
if ($argv[1] == 'install') {
$x = win32_create_service(array(
'service' => $Service,
'display' => $Service,
'params' => __file__ . ' run',
'path' => 'c:\\php\\php.exe',
));
debug_zval_dump($x);
echo
"Service Installed\n\n";
exit;

//Remove Windows Service
} else if ($argv[1] == 'uninstall') {
$x = win32_delete_service($Service);
debug_zval_dump($x);
echo
"Service Removed\n\n";
exit;

//Start Windows Service
} elseif($argv[1] == "start") {
$x = win32_start_service($Service);
debug_zval_dump($x);
echo
"Service Started\n\n";
exit;

//Stop Windows Service
} elseif($argv[1] == "stop") {
$x = win32_stop_service($Service);
debug_zval_dump($x);
echo
"Service Stopped\n\n";
exit;

//Unkown Command
} else if ($argv[1] != 'run') {
ShowHelp(); exit();
}

//Tell windows the service has started...
if (!win32_start_service_ctrl_dispatcher($Service)) die("Could not connect to service : $Service");
win32_set_service_status(WIN32_SERVICE_RUNNING);

// No timeouts, flush content immediatly
set_time_limit(0);
ob_implicit_flush();

//Server Loop
while (1) {
usleep(500);

//Handle Windows Service Request
switch (win32_get_last_control_message()) {
case
WIN32_SERVICE_CONTROL_CONTINUE: break; // Continue server routine
case WIN32_SERVICE_CONTROL_INTERROGATE: win32_set_service_status(WIN32_NO_ERROR); break; // Respond with status
case WIN32_SERVICE_CONTROL_STOP: win32_set_service_status(WIN32_SERVICE_STOPPED); exit; // Terminate script
default: win32_set_service_status(WIN32_ERROR_CALL_NOT_IMPLEMENTED); // Add more cases to handle other service calls
}
//Acutal Server Code

}

//Clean up and Exit
win32_set_service_status(WIN32_SERVICE_STOPPED);
exit;

//*************** FUNCTIONS ***************
function ShowHelp(){
echo
"Usage:
install:\t installs servce
uninstall:\t deletes service
start:\t\t Start the windows service
stop:\t\t Stops the windows service
run:\t\t called by CMS to run the service

For information on code numbers type 'net helpmsg xxxx'
EXAMPEL: 'net helpmsg 1072'

"
;
}
?>
To Top